THIS IS A REPAIR KIT TO REPLACE 1 CORRODED STEEL FRONT ACE PIPE FROM THE VALVE BLOCK END ON RANGE ROVERS L405 AND L494 MODELS 
THE KIT WILL INCLUDE ONE LENGTH OF STEEL HYDRAULIC PIPE APROX 10" ( 25CM ) IN LENGHT BENT TO ORIGINAL SIZE WITH THE FLARE AT THE VALVE BLOCK END , WITH 1 X PIPE COUPLING , 2 X NEW VALVE BLOCK STUDS & NUTS , 2 NYLON COLLET SEALS FOR THE PIPE END
 
PLEASE CHOOSE THE CORRECT PIPE(S) REQUIRED FROM COLOURED CODING (RED, BLUE, GREEN, YELLOW)
RED PIPE = OUTSIDE PIPE FRONT MOST POPULAR
GREEN PIPE = OUTSIDE PIPE REAR , MOST POPULAR
BLUE PIPE = INSIDE PIPE FRONT
YELLOW PIPE = INSIDE PIPE REAR 

PHOTO 2 SHOWS THE PIPES AS VIEWED FROM UNDER THE CAR KERBSIDE , THE VALVE BLOCK IS UNDER THE LEFT NEARSIDE "A" POST AND THE 4 FRONT PIPES COME OUT THE VALVE BLOCK & TURN LEFT TO THE FRONT OF THE CAR
PHOTO 4 SHOWS ALL 4 FRONT PIPES THAT GO TO THE VALVE BLOCK

THIS PIPE KIT SAVES BOTH TIME AND THE COSTLY REPAIR ( £1200 PLUS ) TO REPLACE ALL THE PIPES UNDER THE CAR WHICH ARE OTHERWISE PERFECTLY OK , ORIGINAL CORRODED PIPE REQUIRES RELEASING FROM THE VALVE BLOCK , CUTTING BACK TO GOOD MATERIAL WITH A SMALL TUBE CUTTER OR SIMILAR , OFFER THE NEW PIPE UP TO THE ORIGINAL & CUT AS REQUIRED , ( LESS 13MM FOR LENGHT OF THE PIPE COUPLING ) , TIGHTEN UP THE COUPLING , RE ASSEMBLE THE PIPES BACK INTO THE VALVE BLOCK WITH NEW PLASTIC COLLETS SUPPLIED , REPLACE PLASTIC SILL TRIMS , RE FILL WITH RECOMENDED ACE FLUID IN RESERVOIR , RUN & TEST , BLEED SYSTEM AT FRONT AND REAR ROLL BAR UNITS IF REQUIRED.
IF YOU REQUIRE A REAR PIPE PLEASE ENQUIRE 
ANY QUESTIONS PLEASE WHATTSAPP 07957870691
I SHIP OVERSEAS WITH FAST DELIVERY WITH UPS OR FEDEX . NORTH AMERICA AND EUROPE ORDERS ARE TYPICALLY RECIEVED WITHIN 48 TO 72 HRS OF DISPATCH , PLEASE ASK FOR DETAILS
 
PLEASE CHOOSE THE CORRECT PIPE(S) REQUIRED FROM COLOURED CODING (RED, BLUE, GREEN, YELLOW)
 ....HUNDREDS SOLD TO DATE TO NORTH AMERICA , CANADA , EUROPE & SCANDANAVIA !